Skip to main content

Hartmann Valves GmbH

Hartmann Valves ball valves were developed for extreme challenges and enable the expansion of boundary limits. Gas-tight and with fully metal seated sealing between ball and seat ring, the valves withstand aggressive media, high pressures, and extreme temperatures. The valves “Made in Germany” are precisely tailored to the respective customer requirements to optimize their processes. Through the development of valves (DN125 PN160 – image) for pure oxygen at 350°C and steam at 450°C, oxygen injection was realized that makes the customer’s process significantly more economical. Other valves (12″ PN50) have guaranteed the highest plant availability without disruption for four years, completing approximately 400,000 cycles in degreasing media at approximately 200°C. Furthermore, Hartmann has been producing ball valves for hydrogen applications for 10 years and has implemented the injection of hydrogen from renewable energies into the gas transmission network. For coal pressure gasification plants, 20″ valves have already been delivered for use at over 400°C. The tightness of the valves was verified through a wear test at 425°C with helium as the test medium. For abrasive media such as titanium dioxide (TiO2), Hartmann developed an 8″ valve used for portioning the oxide. With the ball valve, maintenance intervals could be extended from previously a few weeks to 15 months. During this time, the valve completes approximately 1 million cycles.