New film: Why do our ball valves have a metal-to-metal sealing system

01. 7月 2018

The new 3D film explains the advantages of the Hartmann metal-to-metal sealing system in comparison to soft sealing or PMSS systems. When closing the ball valve the internal velocity of the medium increases. The sealing system is now exposed to being struck by high speed debris. In the film you can learn what damage is caused at the inlet and downstream side of a soft sealing ball valve and this will result in expensive repairs. On the contrary, the Hartmann Valves sealing system is metal-to-metal: A hard coated ball and hard coated seat rings are designed to avoid this damage in the seat area. With a rate “A” requirement, the valve should have no visible leakage, and Hartmann metal-to-metal sealing ball valves are gas tight even at high cycles and for a long-lasting shut-off with minimal maintenance effort.

 




<返回

17 freie Stellen und Ausbildungsplätze

×
使用本网站即表示您同意我们按照Cookie政策中所述使用Cookie。
我们使用cookie来改善您在我们网站上的体验。 如果您继续操作而不更改Cookie设置,则我们假设您同意我们在此设备上使用Cookie。